Replacing the lenses

Applies to:

Different colour replacement lenses are available as a Bose Frames accessory. These step-by-step instructions show you how to replace the lenses.

To begin, place a towel or microfibre cloth on a sturdy surface. This provides a soft, low-impact work area in case you accidentally drop a lens

To remove a lens, hold the Frames with the back side facing you

Place your thumbs in the bottom corner closest to the bridge

Press firmly until the entire lens pops out from the Frames. Note: The lenses are made to be replaced, so applying added pressure will not damage the lenses or Frames. Repeat these steps to remove the other lens

To keep your lenses clean, use the microfibre cloth bag included with your Frames and wipe gently. Make sure you’ve removed the USB charging cable first.

To insert a lens, hold the Frames so they’re facing towards you

Remove the lenses from the packaging. The packaging can be used to help determine which lens is left and right

Insert the first lens. When inserting a lens, we recommend applying pressure in this order:

Start with the top corner closest to the bridge

Proceed to the other top corner

Press the corner below that

Lastly, press the bottom corner closest to the bridge

Repeat the same steps for the second lens

To clean the lenses, wipe them gently with the microfibre cloth bag.