Understanding LED indicator status lights and information

Wi-Fi and SoundTouch indicator lights

	Status	Information
	White - Flashing alternately	Disconnect USB cable. These lights flash when the system has been updated via USB but the USB cable was not disconnected upon completion

Wi-Fi indicator light

	Status	Information
	Off	No power or Wi-Fi function disabled
	White - Blinking fast	Connecting to Wi-Fi while system is powered on
	White - Blinking fast, dim	Connecting to Wi-Fi while system is powered off
	White - Blinking	System/source muted
	White - Solid for 3 seconds, then double flash	Installing firmware update
	White - Solid	Connected to Wi-Fi while system is powered on
	White - Solid, dim	Connected to Wi-Fi while system is in power saving mode
	Amber - Blinking	Disconnected from Wi-Fi
	Amber - Solid	System in setup mode (broadcasting "Bose SoundTouch Wi-Fi Network")

TV indicator light

	Status	Information
	White - Solid	A connected source (i.e. TV, CBL/SAT, AUX) is selected
	Green - Solid	Dialogue mode is enabled for the selected connected source (i.e. TV, CBL/SAT, AUX)
	Green - Double blink	Persistent Dialogue mode is enabled for the selected connected source (i.e. TV, CBL/SAT, AUX) Note: Double blink occurs when persistent mode is enabled. Once enabled, the light remains solid green
	White - Blinking	System/source muted

SoundTouch indicator light

	Status	Information
	White - Blinking fast	Connecting to a SoundTouch source
	White - Solid	SoundTouch source is playing
	Amber - Solid	Station or library not found, request/general error or station/service is unavailable
	Amber - Double blink	Preset empty or music service's track skip limit reached Note: Double blink occurs when remote/app control is pressed. After, the light returns to its previous state
	Green - Solid	Dialogue mode is enabled for the SoundTouch source
	Green - Double blink	Persistent Dialogue mode is enabled for the SoundTouch source Note: Double blink occurs when persistent mode is enabled. Once enabled, the light remains solid green
	White - Blinking	System/source muted

Bluetooth indicator light

	Status	Information
	Blue - Blinking	System is in discoverable mode and ready to pair to a Bluetooth device
	White - Blinking fast	Bluetooth source is connecting
	White - Solid	Bluetooth source is connected
	White - Double blink	Bluetooth paired device memory cleared Note: Double blink occurs when 'clear' command is received. After clearing, the light flashes blue, indicating it is ready to pair a new Bluetooth device
	Green - Solid	Dialogue mode is enabled for the SoundTouch source
	Green - Double blink	Persistent Dialogue mode is enabled for the SoundTouch source Note: Double blink occurs when persistent mode is enabled. Once enabled, the light remains solid green

Connectivity indicator light

	Status	Information
	White - Blinking fast	Connecting
	White - Solid	Successful connection to bass module or surround speakers Note: This indicator glows for 30 seconds, then turns off
	Amber - Solid	Disconnection of bass module or surround speakers from the soundbar
	Amber - Blinking	Accessory wireless surround speakers are not detected. For more info, see Wireless rear speakers setup cannot complete

The light on the lower rear of the bass module provides power and connection status information.

	LED State	Indicates
	Off	Power-saving mode
	Amber - Blinking	Ready to pair
	Amber - Solid, dim	Disconnected from the soundbar or control console
	White - Solid	Connected to soundbar or control console
	White - Blinking	Downloading system update
	Red - Blinking	Firmware error
	Any other states	Unknown error. Bass module requires service

Status indicator light

	Status	Information
	Amber - Blinking	Ready to pair
	Amber - Solid, dim	Disconnected from the soundbar or control console
	White - Solid	Connected to soundbar or control console
	White - Blinking	Downloading system update
	Red - Blinking	Firmware error