Back to article
3458
One earbud won't connect or power on
If one earbud is not connecting to a Bluetooth device or powering on, try the following:
Try resyncing the earbuds and charging case.
- Turn off Bluetooth on all devices within 30 ft of the earbuds.
- Place earbuds in the charging case for 5 seconds.
- Remove earbuds from the case. The earbuds and charging case should now communicate as normal.
Check if the battery is charged.
Be sure the battery is not depleted. For more info see, Checking the remaining battery charge and Charging your headphones.
Reboot the Bluetooth® device.
Electronics, such as cell phones, tablets or computers, might need to be reset on occasion to correct minor issues. This is typically done by turning the device off, then powering it on again.
Clear your Bose product memory of previously-connected Bluetooth® devices.
Your Bose product remembers the last several devices it connected to so it can quickly reconnect to them. In case there is an issue with the device memory, clear it and then try to reconnect the device. For more information, see Clearing the product memory of paired Bluetooth devices and Connecting a Bluetooth device.
Your product may need service.
If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.
Click here to start service
Click here to start service
Was this article helpful?
Thank you for your feedback!