Back to article
3343
Noise cancellation is not working
The combination of both active and passive noise reduction technologies in your headphones is desgined to block out most sounds but may not block out everything. You may still hear higher pitched sounds like sirens and even human voices, although the volume of these sounds should be dramatically reduced. If you feel you are not geting any noise reduction with your headphones, here are a few steps you can try.
Make sure you are in "Quiet" mode.
Check your settings in the app to make sure you are in "Quiet" mode not "Aware" mode. In "Aware" mode, external mics on the headset feed outside sounds into the headset and therefore can make other noises or the noise floor seem louder.
See Setting the adjustable Active Noise Cancellation mode.
See Setting the adjustable Active Noise Cancellation mode.
Do you hear static or distorted audio while in noisy environments?
If the audio is distorted while in loud environments such as construction zones or during take off on an airplane, see Crackling sound heard in noisy environments.
Move away from any hard surfaces.
Reflected sound (caused by using the headset close to a hard surface – like a wall) will negatively affect noise cancellation.
Check for and install any available product updates.
On a computer, visit btu.bose.com and follow the instructions to ensure your product has the latest features and enhancements. See Updating the software or firmware of your product.
Be sure the earcups are tightly seated against the head.
Glasses, earrings and hats may prevent the headphone cushions from forming a tight seal around the ear. Remove any of these items and retest the noise cancelling feature.
Be sure the cushions are securely attached to the earcup.
If the ear cushion is not affixed to the ear cup properly, the noise reduction or sound quality may be affected. For more information, see Replacing the ear cushions.
Reset your product.
Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more info, see Resetting your product.
Your product may need service.
If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.
Click here to start service
Click here to start service
Was this article helpful?
Thank you for your feedback!