Microphone picks up sound quietly or poorly

Wind noise may enter the microphone capsule and render other audio unintelligible. Moving away from this area may allow for clear audio reproduction

Try placing another call—preferably to another number—to determine if the issue occurs all the time or only with certain people, which could result from poor reception with the phone service or device you call.

A weak connection to the cell service could cause poor audio quality while on a call. Try the call again when the reception improves.

On the connected device, disconnect the cable that connects your headset. Then, reconnect it to be sure it is fully connected and secure. (Tip: While connected, if you rotate the plug in the jack and hear crackling or intermittent sound, there might be debris or an issue with a contact inside the jack.)

Use a flashlight or other light source to check if any lint or debris has entered the headphone jack on the device, which can interfere with the connection.

Electronics might need to be reset from time-to-time—much like rebooting a computer. Power off the device, then power it back on and try again.

If the plug or any part of the cable for your headphones is damaged, you can replace the cable.

If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service